Order Products : sales@su-jiao.com

TOTAL Polyethylene Aceso® PEM 2420

Category:	LDPE , Low Density Polyethylene
Manufacturer:	TOTAL Refining & Chemicals
Trademark:	TOTAL Polyethylene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gE9fqf_TOTALPolyethyleneAcesoPEM2420.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Aceso® PEM 2420 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the blown film, injection blow molding and extrusion blow molding processes. Aceso® PEM 2420 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging like bags, pouches, blow-fill-seal applications, medical films, tubes, etc... However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations.

Message

Aceso® PEM 2420 is a low density polyethylene made by a high pressure autoclave process without antioxidant. This grade is particularly suitable for the blown film, injection blow molding and extrusion blow molding processes.

Aceso® PEM 2420 has been specifically designed for the manufacture of healthcare products and pharmaceutical packaging like bags, pouches, blow-fill-seal applications, medical films, tubes, etc... However it is recommended to contact your local sales representative to obtain specific information and individual certificates regarding compliance to regulations.

General Information
Features	Low density
Uses	Blown Film Films Bags Pipe fittings Drug packaging Medical/nursing supplies
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Forms	Particle
Processing Method	Blow film Extrusion blow molding Injection blowing molding

Physical	Nominal Value	Unit	Test Method
Density	0.923	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.3	g/10 min	ISO 1133

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	96.0	°C	ISO 306
Melting Temperature	109	°C	ISO 11357-3

Extrusion	Nominal Value	Unit
Melt Temperature	160 - 200	°C

Resin Grade	Manufacturer	Category	Trademark
VICTREX® PEEK 650CA30	Victrex plc	PEEK	VICTREX® PEEK
Vinylbond 95-950-45	Colorite Polymers	PVC, Flexible	Vinylbond
NaturePlast NP BF 001	NaturePlast	Biodeg Polymers	NaturePlast
InnoPlus HD1100J	PTT Global Chemical Public Company Limited	HDPE	InnoPlus
Sylvin 6930X07 White 1490	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin