Order Products : sales@su-jiao.com

NuSil GEL-8250

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	gDbQpc_NuSil-GEL-8250.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Gels Comments: Low/High Temperature, Penetration 5mm

Message

As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.

Benefits of Silicone for Electronics:

Wide Operating Temperature Range of -115 °C to 250 °C

Low moisture absorption, < 0.4% Typical

Corrosion Resistance

High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm

Fillers can be added to provide thermal and electrical conductive properties

Low Modulus (Typically less than 5.5 MPa/800 psi)

Stable chemical and mechanical properties when exposed to high temperatures

Low Shrinkage

Available as gels, elastomers, film adhesives sheeting, and greases

General Purpose: Gels

Comments: Low/High Temperature, Penetration 5mm

General Information
Features	Good Corrosion Resistance Good Thermal Stability Low Moisture Absorption Low Shrinkage
Uses	Electrical/Electronic Applications
Forms	Gel

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum
Operating Temperature	-115 to 260	°C

Uncured Properties	Nominal Value	Unit
Color	Clear/Transparent
Viscosity ¹	0.65	Pa·s
Curing Time (100°C)	0.50	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Electric Strength	20	kV/mm

Note Message
1 .	Mixed

Resin Grade	Manufacturer	Category	Trademark
TOTAL Polypropylene PPC 3660	TOTAL Refining & Chemicals	PP Impact Copolymer	TOTAL Polypropylene
WPP PP WPP311D	Washington Penn Plastic Co. Inc.	PP Impact Copolymer	WPP PP
Ethylplus 619 LD	Fainplast Compounds S.r.l	LDPE	Ethylplus
DURACON® MS-02	Polyplastics Co., Ltd.	Acetal (POM) Copolymer	DURACON®
EMPBT® GFR 30	EMAS Plastik San.Tic.AS.	PBT	EMPBT®