Order Products : sales@su-jiao.com
ASI POLYETHYLENE CP 763-01 Natural
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYETHYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gDITmS_ASI-POLYETHYLENE-CP-763-01-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CP 763-01 Natural is an extruded, blow molding, and injection molding grade of low density polyethylene having good processability and heat sealability. This material meets the FDA Regulation 177.1520 for food contact applications. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.917 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 200 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 207 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 92.0 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYLAC® PA-717C | CHI MEI CORPORATION | ABS | POLYLAC® |
| Prime Tuff-X STF | Primex Plastics Corporation | TPE Alloy | Prime Tuff-X |
| Bergamid™ PA66 C20 Black | PolyOne Corporation | Nylon 66 | Bergamid™ |
| LOXIM 230 12 V0 | LOXIM Industries Private Limited | PBT | LOXIM |
| MARPOL® HDB 503G | Marco Polo International, Inc. | HDPE | MARPOL® |
