Order Products : sales@su-jiao.com
Formolene® HB6007
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | gD8g2W_Formolene-HB6007.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® HB6007 is a high quality product for those critical food packaging requirements. It also has excellent stiffness and good stiffness properties. Formolene® HB6007 meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.964 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.65 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| Compression Molded, F50 | 10.0 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | 15.0 to 20.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 30.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | > 300 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1650 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3506 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| SKYGREEN® JN100 | SK Chemicals | PCTG | SKYGREEN® |
| TAIRIPRO K9010 | Formosa Plastics Corporation | PP Impact Copolymer | TAIRIPRO |
| Complet® LGF60-PA66 MT | PlastiComp, Inc. | Nylon 66 | Complet® |
| INEOS HDPE K44-15-122 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
