Order Products : sales@su-jiao.com
Alkatuff® 501
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Alkatuff® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g9R2S4_Alkatuff-501.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
501 is a hexene copolymer linear low density polyethylene, designed for a variety of film applications. 501 is formulated with a stabilisation package but contains no other additives. 501 is intended for general purpose applications such as liners, garbage, industrial and agricultural films. 501 is not recommended for use in outdoor applications (especially applications where there may be prolonged exposure to sunlight, eg. agricultural films) without the addition of appropriate Hindered Amine based Light Stabilisers (HALS). 501 is suitable for food contact applications and conforms to the requirements of the United States Food and Drug Administration CFR 21 177.1520, paragraph (c), item 3.1. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.925 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 0.50 0.50 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 50 | µm | |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 25 µm | 230 | MPa | ASTM D882 |
| 2% secant, MD : 50 µm | 240 | MPa | ASTM D882 |
| 2% secant, TD : 25 µm | 270 | MPa | ASTM D882 |
| 2% secant, TD : 50 µm | 280 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 11.0 | MPa | ASTM D882 |
| MD : Yield, 50 µm | 11.0 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 13.0 | MPa | ASTM D882 |
| TD : Yield, 50 µm | 13.0 | MPa | ASTM D882 |
| MD : Break, 25 µm | 43.0 | MPa | ASTM D882 |
| MD : Break, 50 µm | 43.0 | MPa | ASTM D882 |
| TD : Break, 25 µm | 34.0 | MPa | ASTM D882 |
| TD : Break, 50 µm | 41.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 900 | % | ASTM D882 |
| MD : Break, 50 µm | 1100 | % | ASTM D882 |
| TD : Break, 25 µm | 950 | % | ASTM D882 |
| TD : Break, 50 µm | 1200 | % | ASTM D882 |
| Dart Drop Impact | ASTM D1709 | ||
| 25 µm, blown film | 120 | g | ASTM D1709 |
| 50 µm, blown film | 220 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 200 | g | ASTM D1922 |
| MD : 50 µm | 500 | g | ASTM D1922 |
| TD : 25 µm | 530 | g | ASTM D1922 |
| TD : 50 µm | 980 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | ASTM D2457 | ||
| 25.0 µm, blown film | 66 | ASTM D2457 | |
| 50.0 µm, blown film | 62 | ASTM D2457 | |
| Haze | ASTM D1003 | ||
| 25.0 µm, blown film | 9.0 | % | ASTM D1003 |
| 50.0 µm, blown film | 12 | % | ASTM D1003 |
| Additional Information |
|---|
| Film properties taken from blown film processed at a blow up ratio of 3.5:1. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 8705FR-1 | Colorite Polymers | PVC, Unspecified | Unichem |
| NORYL™ PN275 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| Ad-Tech Epoxy EA-610 E-CRETE | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Bergamid™ B70 G45 BK LS | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Cellidor CP 400-10 | ALBIS PLASTIC GmbH | CAP | Cellidor |
