Order Products : sales@su-jiao.com
Retpol® 7573 UVH
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyPacific Pty. Ltd. |
| Trademark: | Retpol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g9M2RE_Retpol-7573-UVH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EPALEX 7573 UVH is an unfilled thermoplastic rubber modified polypropylene compound. It is a low flow extrusion grade formulated as a capping layer to give high gloss and improved mar resistance and is stabilized to provide long term protection against outdoor weathering. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.2 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.00 mm) | 1.4 to 1.8 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, 3.00 mm) | 60 | ASTM D785 | |
| Durometer Hardness | ASTM D2240 | ||
| Shore D, 3.00 mm | 69 | ||
| Shore D, 15 sec, 3.00 mm | 60 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(3.00 mm) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.00 mm) | 500 | % | ASTM D638 |
| Flexural Modulus (3.00 mm) | 840 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C, 3.00 mm | 92 | J/m | |
| 23°C, 3.00 mm | 510 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.00 mm) | 67.0 | °C | ASTM D648 |
| CLTE - Flow (-30 to 30°C, 3.00 mm) | 1.0E-4 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Suggested Max Regrind | 10 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Cylinder Zone 1 Temp. | 180 to 240 | °C | |
| Cylinder Zone 2 Temp. | 180 to 240 | °C | |
| Cylinder Zone 3 Temp. | 180 to 240 | °C | |
| Cylinder Zone 4 Temp. | 180 to 240 | °C | |
| Cylinder Zone 5 Temp. | 180 to 240 | °C | |
| Melt Temperature | 200 to 220 | °C | |
| Die Temperature | 200 to 220 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 107 HI | RTP Company | PP Copolymer | RTP |
| TOTAL Polyethylene HDPE 5502 (EU) | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| BJB Polyurethane TC-421 A/B-C CASTABLE | BJB Enterprises, Inc. | TSU | BJB Polyurethane |
| ELASTOSIL® LR 3066/80 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
| Latigray 75/4-01 CX/45 | LATI S.p.A. | PBT | Latigray |
