Order Products : sales@su-jiao.com
APICAL 250AF029
| Category: | Film, PI , Thermoset Polyimide |
| Manufacturer: | Kaneka Corporation |
| Trademark: | APICAL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g8SAWz_APICAL-250AF029-5197.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| APICAL 250AF029 is a PI Film material. It is available in Latin America or North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Absorption (23°C, 24 hr) | < 3.0 | % | IPC TM-650 2.6.2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882A | ||
| MD : Break | > 138 | MPa | |
| TD : Break | > 138 | MPa | |
| Tensile Elongation | ASTM D882A | ||
| MD : Break | > 60 | % | |
| TD : Break | > 60 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (200°C) | > 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength 1(in Air) | > 160 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | < 3.90 | ASTM D150 | |
| Dissipation Factor (1 kHz) | < 3.5E-3 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 500 V/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® PC 730/3.1 UV WT1283-09LDM | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| FRIANYL® B3 VNGF25 V0 | Nilit Plastics | Nylon 6 | FRIANYL® |
| ELASTOSIL® M 4512 | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| EMOPLEN® HP MCF 30 | EMAS Plastik San.Tic.AS. | PP Homopolymer | EMOPLEN® |
| PLUSTEK RB703 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
