Order Products : sales@su-jiao.com

PULSE™ XT50

Category:	PC+ABS , PC/ABS Engineering Resin
Manufacturer:	Trinseo
Trademark:	PULSE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	g7OLkL_PULSEXT50.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

PULSE XT50 is a very easy flow, medium-heat, high gloss and low density PC/ABS resin delivering optimized performance for automotive exterior component applications.

Benefits

High gloss and meeting exterior paintability requirements.

Low density driving to lighter and cost optimized parts.

Very easy flow, reduced scrap, and faster cycle times, while enabling thin wall part design for mass reduction.

Heat resistance optimized for the majority of automotive exterior applications.

Applications

Spoilers

Side mirrors

Front grills

Exterior trims

General Information
Features	Low density Highlight Sprayable Fast molding cycle High liquidity Heat resistance, medium
Uses	Application in Automobile Field Automotive exterior parts Car exterior decoration
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Density	1.10	g/cm³	ISO 1183/B
Apparent Density	0.63	g/cm³	ISO 60
Melt Mass-Flow Rate (MFR) (260°C/5.0 kg)	25	g/10 min	ISO 1133
Spiral Flow	63.0	cm
Molding Shrinkage	0.40 - 0.70	%	ISO 294-4
VOC Content	15.0	µg/g	VDA 277

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ¹	2300	MPa	ISO 527-2
Tensile Stress (Yield)	47.0	MPa	ISO 527-2/50
Tensile Strain (Break)	> 50	%	ISO 527-2/50

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-30°C	25	kJ/m²	ISO 179/1eA
23°C	50	kJ/m²	ISO 179/1eA

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	94.0	°C	ISO 75-2/A
Vicat Softening Temperature	111	°C	ISO 306/B50
CLTE - Flow (-30 to 80°C)	7.5E-5	cm/cm/°C	ISO 11359-2

Injection	Nominal Value	Unit
Drying Temperature	100	°C
Drying Time	4.0	hr
Processing (Melt) Temp	255 - 280	°C
Mold Temperature	60 - 80	°C

Note Message
1 .	1 mm/min

Resin Grade	Manufacturer	Category	Trademark
ULTEM™ 2312EPR resin	SABIC Innovative Plastics	PEI	ULTEM™
HiFill® PA6 GF/M55 HS L BK	Techmer Engineered Solutions	Nylon 6	HiFill®
IROGRAN® A 92 P 4851	Huntsman Corporation	TPU-Polyether	IROGRAN®
PENTAMID B GV15 H RC schwarz	PENTAC Polymer GmbH	Nylon 6	PENTAMID B
Plenco 04414 (Transfer)	Plastics Engineering Co.	Phenolic	Plenco