Order Products : sales@su-jiao.com
ENVIRON® ENV39-NC490
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | ENVIROPLAS®, Inc. |
| Trademark: | ENVIRON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g7M2Di_ENVIRON-ENV39-NC490.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Foamable - Injection Molding Grade, Fiberglass Reinforced, Flame Retardant, UV Stabilized, Good Chemical and Heat Resistance, RoHS Compliant NC490 = To Be Assigned 5 Digit Number Indicating Natural, Black, or Limited Available Custom Color. Contact Enviroplas Regarding UL Recognized Versions Of This Product. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | ASTM D792 | ||
| -- 1 | 1.14 | g/cm³ | |
| -- | 1.27 | g/cm³ | |
| Molding Shrinkage - Flow | 4.0 to 6.0 | % | ASTM D955 |
| Ash Content | 7.5 | % | ASTM D5630 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break, 6.00 mm) | 48.3 | MPa | ASTM D638 |
| Flexural Modulus (6.00 mm) | 2910 | MPa | ASTM D790 |
| Flexural Strength (6.00 mm) | 80.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.00 mm) | 190 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.00 mm) | 107 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 2 | Internal Method | ||
| 3.00 mm | V-0 5VA | ||
| 6.00 mm | V-0 5VA |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 238 to 254 | °C | |
| Middle Temperature | 243 to 260 | °C | |
| Front Temperature | 249 to 266 | °C | |
| Nozzle Temperature | 243 to 260 | °C | |
| Mold Temperature | 65.6 to 93.3 | °C | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.345 to 0.689 | MPa | |
| Screw Speed | 50 to 80 | rpm |
| Note Message | |
|---|---|
| 1 . | Foamed at 6mm |
| 2 . | Pending UL submission |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Gravi-Tech™ X ET6000-0581 MG Black | PolyOne Corporation | Nylon 6 | Gravi-Tech™ |
| Innoprene 1350N/B | Kumho Polychem Co., Ltd. | TPV | Innoprene |
| LUBEMID A26 GF50 NATURAL | LUBEN PLAST srl | Nylon 66 | LUBEMID |
| Pibiter® NRV230AE NAT001 | SO.F.TER. SPA | PBT | Pibiter® |
| POLYCASA® ACRYL G 55 | Polycasa | Acrylic (PMMA) | POLYCASA® ACRYL |
