Order Products : sales@su-jiao.com
Borlink™ LE4201EHV
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Borlink™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g5ZWol_Borlink-LE4201EHV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Borlink LE4201EHV is a crosslinkable natural Superclean polyethylene compound, specially designed for insulation of energy cables. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.922 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Moisture | < 200 | ppm | Karl Fisher |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Set 2 | IEC 60811-507 | ||
| Elongation under load : 200°C | 75 | % | |
| Permanent deformation : 200°C | 5.0 | % |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gottfert Elastograph | 0.59 to 0.74 | N·m | ISO 6502 |
| Methanol Wash | 1000 | ppm | Internal Method |
| Scorch Time - t10 | > 48.0 | sec | ISO 6502 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 17.0 | MPa | ISO 527-2/250 |
| Tensile Strain (Break) | > 450 | % | ISO 527-2/250 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strain at Break in Air (135°C, 168 hr) | < 20 | % | IEC 60811-401 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength 3 | 40 | kV/mm | IEC 60243-1 |
| Dielectric Constant (50 Hz) | 2.30 | IEC 60250 | |
| Dissipation Factor (50 Hz) | 3.0E-4 | IEC 60250 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 125 to 135 | °C |
| Note Message | |
|---|---|
| 1 . | Base Resin |
| 2 . | 0.20 MPa |
| 3 . | 50 Hz |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2500 FR-3010 | RTP Company | PC+ABS | RTP |
| TPUCO® TPUI-H95 | Taiwan PU Corporation | TPU-Polyether | TPUCO® |
| AKROMID® B3 GM 10/20 natural (3691) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| LUVOCOM庐 6-8438-1 | Lehmann & Voss & Co. | Nylon 12 | LUVOCOM® |
| 3M™ Dyneon™ Fluoroelastomer FE 5530 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
