Order Products : sales@su-jiao.com
Vistek 1963 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Visual Polymer Technologies, LLC |
| Trademark: | Vistek |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g5UxLB_Vistek-1963-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vistek 1963 F is a thermoplastic material,. This product is available in North America,. The main characteristics of Vistek 1963 F are: accessible food. The typical application field of Vistek 1963 F is: food contact application |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 13 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 17 | % | ASTM D638 |
| Flexural Modulus | 1970 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 52.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 48 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 85.0 | °C | ASTM D648 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Transmittance | 90.0 | % | ASTM D1003 |
| Haze | 2.9 | % | ASTM D1003 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 193 - 232 | °C | |
| Middle Temperature | 193 - 232 | °C | |
| Front Temperature | 193 - 232 | °C | |
| Mold Temperature | 26.7 - 54.4 | °C |
| Injection instructions |
|---|
| Pre-drying is typically not needed. In excessive humidity, pre-dry at 160° F for 2 to 4 hours.Back Pressure: Medium to High |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VisiJet® SL e-Stone | 3D Systems | Epoxy | VisiJet® |
| Amilan® CM3304-V0 | Toray Resin Company | Nylon 66 | Amilan® |
| Fainplast PVC MPH 87 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| ENVIROPLAS® ENV17-NC030 | ENVIROPLAS®, Inc. | PEI | ENVIROPLAS® |
| PLUSTEK PD120BK11 | Polyram Ram-On Industries | Nylon 12 | PLUSTEK |
