Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic THV 610GZ
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g5Sh3h_3M-Dyneon-Fluoroplastic-THV-610GZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dyneon™ THV 610G Z Fluorothermoplastic extends the melting point of THV grades to include those applications which require higher temperature service capabilities than that available from other THV grades. This grade provides good flexibility versus other Fluoroplastics, but it is stiffer than the other grades of THV as the data below shows. This grade is available in pellet (G designation) form. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.04 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) | 10 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 28.0 | MPa | ISO 527-1 |
| Tensile Strain (Break) | 500 | % | ISO 527-1 |
| Flexural Modulus | 490 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 185 | °C | ISO 12086 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | > 75 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Romiloy® 1035 | ROMIRA GmbH | PC+ABS | Romiloy® |
| SUMILITE® PVC VSL-4501 | Sumitomo Bakelite Co., Ltd. | PVDC | SUMILITE® PVC |
| TEREZ PA 6.6 7510 GF 30 HY | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| Abstron SE32H | Bhansali Engineering Polymers Limited | ABS | Abstron |
| ESTAPROP 1040 V2 HK BLU 6237 PANT 285C | Cossa Polimeri S.r.l. | PP Copolymer | ESTAPROP |
