Order Products : sales@su-jiao.com
ISPLEN® PM 274 AS
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | REPSOL |
| Trademark: | ISPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g5MGpq_ISPLEN-PM-274-AS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polypropylene copolymer, 20% mineral fillers reinforced and with high processability. ISPLEN® PM274 AS shows high stiffness and good impact strength. It gives good aesthetic properties and high gloss surface. The product has a standard stabilization, able to be used in the main applications. APPLICATIONS
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.06 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 14 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, 15 sec) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2200 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 21.0 | MPa | |
| Break | 21.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield | 3.0 | % | |
| Break | 15 | % | |
| Flexural Modulus | 2300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -40°C | 1.6 | kJ/m² | |
| -20°C | 2.0 | kJ/m² | |
| 0°C | 2.5 | kJ/m² | |
| 23°C | 3.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -40°C | 24 | kJ/m² | |
| -20°C | 28 | kJ/m² | |
| 0°C | 30 | kJ/m² | |
| 23°C | 52 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 91.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 59.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 150 | °C | ISO 306/A120 |
| -- | 79.0 | °C | ISO 306/B120 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Thermoplastic Polyolefin FT3080-01UVA | RheTech, Inc. | Polyolefin, Unspecified | RheTech Thermoplastic Polyolefin |
| SLOVAMID® 6 GF 50 LS | Plastcom | Nylon 6 | SLOVAMID® 6 |
| AKROMID® B3 GF 30 1 XL black (4366) | AKRO-PLASTIC GmbH | Nylon 6+PP | AKROMID® |
| DeWAL DW 300-1 | DeWAL Industries | PI, TP | DeWAL |
| LOTTMER SE-130AN | Lotte Chemical Corporation | SEBS | LOTTMER |
