Order Products : sales@su-jiao.com
DJSilicone NE-8151
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g4xrv8_DJSilicone-NE-8151.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| With better tensile strength, elongation and tear strength than common and general silion rubber, high-strength silicone rubber for molding is suitable for molding products with higher mechanical property requirements. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 to 1.20 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 48 to 52 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 8 | % | ASTM D412 |
| Tensile Strength (Yield) | > 9.00 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 460 | % | ASTM D412 |
| Tear Strength | > 24.0 | kN/m | ASTM D624 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® Vestolen A 6013 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® Vestolen A |
| Sindustris ABS LXR585F | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| Moplen EP545L | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| AKROMID® A3 GF 60 1 natural (2396) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| InnoGreen® BIO-90A | Innovative Polymers, Inc. | TSU | InnoGreen® |
