Order Products : sales@su-jiao.com
NuSil MED-1031
| Category: | Silicone , Silicone |
| Manufacturer: | NuSil Technology |
| Trademark: | NuSil |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | g4dM6S_NuSil-MED-1031.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Restricted Healthcare Silicones Definition: NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump). In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility. Comments: NO ACIDIC LEAVING GROUP |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (100% Strain) | 1.03 | MPa |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure System | Oxime | ||
| Extrusion Rate | 70.0 | g/min |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.10 | g/cm³ | |
| Curing Time (23°C) | 1.7E+2 | hr | |
| Pot Life (25°C) | < 25 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore A) | 35 | ||
| Tensile Strength | 5.86 | MPa | |
| Tensile Elongation at Break | 330 | % | |
| Tear Strength | 7.01 | kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex A0050FB | Ginar Technology Co., LTD. | Nylon 66 | Mapex |
| Complet® LGF30-PA66 MT | PlastiComp, Inc. | Nylon 66 | Complet® |
| Elastollan® C 59 D | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| Jamplast JPLGABSI | Jamplast, Inc. | ABS | Jamplast |
| Paracril® 1945 | INSA | NBR | Paracril® |
