TECHNYL® C 256 V18 (EX PSB 197) NATURAL Datasheet,Nylon 6,Solvay Engineering Plastics-SHANGHAI SUSHENG

Message
TECHNYL® C 256 V18 Natural is a polyamide PA 6 impact modified, reinforced with 18% of glass fibre, for injection moulding. This grade offers high impact strength and good mechanical properties.

General Information
Filler / Reinforcement	Glass fiber reinforced material, 18% filler by weight
Additive	Impact modifier heat stabilizer
Features	Impact resistance, high Good demoulding performance
Uses	Sporting goods
Agency Ratings	EC 1907/2006 (REACH)
RoHS Compliance	RoHS compliance
Appearance	Black Natural color
Forms	Particle
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1)
Resin ID (ISO 1043)	PA6-GF18

Physical	Dry	Conditioned	Unit	Test Method
Density	1.23	--	g/cm³	ISO 1183/A
Water Absorption (Equilibrium, 23°C, 50% RH)	2.4	--	%	ISO 62

Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (23°C)	6000	3300	MPa	ISO 527-2/1A
Tensile Strength
Yield, 23°C	110	70.0	MPa	ASTM D638
Fracture, 23°C	120	70.0	MPa	ISO 527-2/1A
Tensile Elongation
Fracture, 23°C	3.6	10	%	ASTM D638
Fracture, 23°C	3.5	8.7	%	ISO 527-2
Flexural Modulus (23°C)	5500	3000	MPa	ISO 178

Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-30°C	7.5	--	kJ/m²	ISO 179/1eA
23°C	13	20	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength				ISO 179/1eU
-30°C	80	--	kJ/m²	ISO 179/1eU
23°C	75	80	kJ/m²	ISO 179/1eU
Notched Izod Impact				ISO 180
-30°C	13	--	kJ/m²	ISO 180
23°C	13	22	kJ/m²	ISO 180
Unnotched Izod Impact (23°C)	75.0	80.0	kJ/m²	ASTM D256
Unnotched Izod Impact Strength (23°C)	60	65	kJ/m²	ISO 180/1U

Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	215	--	°C	ISO 75-2/Bf
1.8 MPa, not annealed	192	--	°C	ISO 75-2/Af
Melting Temperature	222	--	°C	ISO 11357-3

Flammability	Dry	Conditioned		Test Method
Flame Rating (1.6 mm)	HB	--		UL 94

Injection	Dry	Unit
Drying Temperature	80	°C
Suggested Max Moisture	0.20	%
Rear Temperature	230 - 235	°C
Middle Temperature	235 - 240	°C
Front Temperature	240 - 250	°C
Mold Temperature	60 - 90	°C

Injection instructions
The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Injection instructions

The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4hInjection Advice: For reinforced polyamide, Solvay recommends the use of steel with a high content of Carbon and purified for polishing to avoid or limit the abrasion. For example: X38CrMoV5-1 (EN Norm) - 1.2367 /1.2343 (DIN Norm) or X160CrMoV12 (EN Norm) - 1.2601 /1.2379 (DIN Norm). For Mould Temperature, in the case of parts where the surface roughness is required we can recommend a temperature of 90°C to 120°C with an optimum at 105°C. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection machine size, part geometry / design

Category:	Nylon 6 , Polyamide 6
Manufacturer:	Solvay Engineering Plastics
Trademark:	TECHNYL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	g28wrs_TECHNYLC256V18EXPSB197NATURAL.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
U-polymer LM-8503-10	UNITIKA Plastics Division	Polyarylate	U-polymer
Alathon® M5370	LyondellBasell Industries	HDPE Copolymer	Alathon®
Cosmic Epoxy EH81	Cosmic Plastics, Inc.	Epoxy	Cosmic Epoxy
LubriOne™ LB6000-5003BK	PolyOne Corporation	Nylon 6	LubriOne™
Sylvin 7833-80 Green 3188	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin