Order Products : sales@su-jiao.com

RELENE® LL20DS010

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Reliance Industries Limited
Trademark:	RELENE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	g0infT_RELENE-LL20DS010.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LL20DS010 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), for Drip lateral applications. Drop laterals produced out of this grade has outstanding processability and, tensile and elongation properties compared to that of a conventional LLDPE grade. This grade meets the requirements of material as per IS 12786:1989 on 'Irrigation equipment-Polyethylene pipes for irrigation laterals-specification". When incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786:1989, the pipe made from this grade will meet the creep rupture stresss requirement of PE-25 class of pipe.

Message

LL20DS010 is a Butene Comonomer based Linear Low Density Polyethylene (LLDPE), for Drip lateral applications. Drop laterals produced out of this grade has outstanding processability and, tensile and elongation properties compared to that of a conventional LLDPE grade. This grade meets the requirements of material as per IS 12786:1989 on 'Irrigation equipment-Polyethylene pipes for irrigation laterals-specification". When incorporated with adequate quantity of carbon black as specified in clause 4.1 of IS 12786:1989, the pipe made from this grade will meet the creep rupture stresss requirement of PE-25 class of pipe.

General Information
Features	Butene Comonomer Food Contact Acceptable General Purpose Good Processability
Uses	General Purpose Packaging Piping
Agency Ratings	FDA 21 CFR 177.1520 IS 10141-1982 IS 10146-1982

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.2	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield, Injection Molded)	12.0	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield, Injection Molded	13	%
Break, Injection Molded	> 350	%

Resin Grade	Manufacturer	Category	Trademark
Mirakutoran® TPU E380PKOO	Japan Mirakutoran Inc.	TPU Alloy	Mirakutoran® TPU
Shin-Etsu Elastomer SFX-14032AU	Shin-Etsu Silicones of America	Fluoro Si	Shin-Etsu Elastomer
Axiall PVC 5006 Natural	Axiall Corporation	PVC, Rigid	Axiall PVC
Iupital® FG2025	Mitsubishi Engineering-Plastics Corp	Acetal (POM) Copolymer	Iupital®
Sylvin 8952-65UV White	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin