Order Products : sales@su-jiao.com

PrimoPrene 65A-1000

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	KMI Group Inc.
Trademark:	PrimoPrene
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	g09AHn_PrimoPrene-65A-1000.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Attributes:

PrimoPrene TPV is a thermoplastic elastomer containing fully vulcanized EPDM rubber.

It is ideal solution for applications requiring long term sealing performance even at elevated temperatures up to 135°C (275F).

Can be processed using conventional thermoplastic processing equipment. Suitable for injection molding, blow molding, profile and sheet extrusion applications.

PrimoPrene TPV is supplied in weatherable (UV stabilized) black.

PrimoPrene TPV is in compliance with FDA, CFR title 21 Section 177.2600 "Rubber articles intended for repeated use"; and 177.1210 "Closures with sealing Gaskets for food Containers".

Applications:
PrimoPrene is a cost effective solution for replacing Santoprene rubber, styrenic-based TPEs, and thermoset rubbers such as EPDM, and Polychloroprene. It is an excellent choice for applications requiring flexibility in the following markets: automotive parts, appliance, business machines, construction, consumer products, and electronics.

General Information
Additive	Rubber 2 UV Stabilizer
Features	Good Colorability Good Flexibility Good Heat Seal Good UV Resistance Soft
Uses	Appliances Automotive Applications Business Equipment Construction Applications Consumer Applications Electrical/Electronic Applications Flexible Grips Handles
Agency Ratings	FDA 21 CFR 177.1210 FDA 21 CFR 177.2600
Appearance	Black
Processing Method	Extrusion Injection Molding Profile Extrusion Sheet Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.970	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) ¹(230°C/10.0 kg)	8.0 to 15	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness			ASTM D2240
Shore A, 5 sec	68
Shore A, 15 sec	65

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ²(100% Strain, 23°C)	2.90	MPa	ASTM D412
Tensile Strength ³(Yield, 23°C)	8.00	MPa	ASTM D412
Tensile Elongation ⁴(Break, 23°C)	550	%	ASTM D412
Tear Strength ⁵(23°C)	37.0	kN/m	ASTM D624
Compression Set			ASTM D395
70°C, 22 hr	35	%
125°C, 70 hr	51	%

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	-65.0	°C	ASTM D746
Melting Temperature	159	°C

Additional Information	Nominal Value		Test Method
Ozone Resistance ⁶	Excellent		ASTM D1149

Injection	Nominal Value	Unit
Drying Temperature	82.2	°C
Drying Time	3.0	hr

Extrusion	Nominal Value	Unit
Drying Temperature	65.6	°C
Drying Time	3.0	hr

Note Message
1 .	Procedure A
2 .	500 mm/min
3 .	500 mm/min
4 .	500 mm/min
5 .	Die C, 500 mm/min
6 .	500 hr, 100 pphm O3 conc.

Resin Grade	Manufacturer	Category	Trademark
TEKASTER™ F10G15M	Mando Advanced Materials Co., Ltd.	PBT	TEKASTER™
TEREZ PA 6.6 8950 T GF 30	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
TIPELIN® FB 472-02	MOL Petrochemicals Co. Ltd.	HDPE	TIPELIN®
Karina IVORY PVC COMP. -E 922-35/ 1-BY-IS	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
Pier One POM AH500P BK	Pier One Polymers, Inc.	Acetal (POM) Homopolymer	Pier One POM