Order Products : sales@su-jiao.com
Koylene ADL AM650N
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | Koylene ADL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fyURMA_Koylene-ADL-AM650N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Koylene ADL AM650N is polypropylene homopolymer suitable for injection moulded products requiring appropriate balance of toughness and rigidity. Its ease of mouldability, good mechanical and thermal properties make it a material of choice. FOOD CONTACT APPLICATIONS: This grade meets with the requirements of Indian Standard IS: 10910 on "Specifications for Polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water". The grade also complies with FDA regulation : CFR TITLE 21 - 177.1520, on olefin polymers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 65 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm, Injection Molded) | 35.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield, 3.20 mm, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus 3(3.20 mm, Injection Molded) | 1400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm, Injection Molded) | 44 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 152 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 | °C | |
| Middle Temperature | 190 | °C | |
| Front Temperature | 205 | °C | |
| Nozzle Temperature | 215 | °C | |
| Mold Temperature | 40.0 to 80.0 | °C | |
| Injection Pressure | 58.8 to 98.1 | MPa |
| Note Message | |
|---|---|
| 1 . | Type I |
| 2 . | Type I |
| 3 . | Type I |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SEPTON™ 2104 | Kuraray Co., Ltd. | SEPS | SEPTON™ |
| Trexprene® A70NI-HF | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| Yanshan PE 112A-1 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Zetpol® 3300 | Zeon Corporation | NBR | Zetpol® |
| Acculam™ Phenolkraft Paper X/XX | Accurate Plastics, Inc. | Phenolic | Acculam™ |
