Order Products : sales@su-jiao.com

RenPIM® VG 5284 Polyol/ 5284 Isocyanate

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Huntsman Advanced Materials
Trademark:	RenPIM®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fwgWxO_RenPIM-VG-5284-Polyol-5284-Isocyanate.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production. RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press. Parts are made within minutes at low cost giving you time and cost savings. The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures. You can choose materials from a clear and concise product range at competitive prices to suit your requirements. The products are well proven, thoroughly tested and endorsed by MCP.

Message

A fast curing 2-component Polyurethane casting system for use in vacuum casting equipment to simulate the appearance and physical properties of a wide range of engineering thermoplastics for rapid prototyping or short series production.

RenPIM® Vacuum Grade allows you to produce thermoplastic like parts without the high cost of steel moulds and press.

Parts are made within minutes at low cost giving you time and cost savings.

The high quality parts made from RenPIM® Vacuum Grade are dimensionally stable and accurately reproduce fine surface detail and textures.

You can choose materials from a clear and concise product range at competitive prices to suit your requirements.

The products are well proven, thoroughly tested and endorsed by MCP.

General Information
Features	Good Dimensional Stability High Heat Resistance High Impact Resistance
Appearance	Clear Amber
Forms	Pellets
Processing Method	Vacuum Casting

Hardness	Nominal Value		Test Method
Shore Hardness (Shore D, 23°C)	68		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Break)	25.0	MPa	ISO 527-2
Tensile Strain (Break)	130	%	ISO 527-2
Flexural Modulus	660	MPa	ISO 178

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed)	97.0	°C	ISO 75-2/A

Thermoset	Nominal Value	Unit
Pot Life (40°C)	13 to 16	min
Demold Time (70°C)	120	min

Additional Information	Nominal Value	Unit
Maximum Layer Thickness	1.00	cm
Mixing Ratio	32:100

Resin Grade	Manufacturer	Category	Trademark
Sarlink® TPE ME-1345N	Teknor Apex Company	TPE	Sarlink® TPE
Sumikon® EME-6300HN	Sumitomo Bakelite Co., Ltd.	Epoxy	Sumikon®
CONTINUUM™ DGDC-2482 NT	The Dow Chemical Company	HDPE	CONTINUUM™
Trilliant™ HC 2020-0001 FR	PolyOne Corporation	Copolyester	Trilliant™ HC
Sylvin 5175-92 Red 6243	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin