Order Products : sales@su-jiao.com
Primefin V525H
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Lucent Polymers, Inc. |
| Trademark: | Primefin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ftgyll_Primefin-V525H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Impact Modified Polypropylene Colors Available Meets MS-DB543 CPN3682, ESB-M4D175-B |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 8.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 1.4 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 10 | % | ASTM D638 |
| Flexural Modulus | 965 | MPa | ASTM D790 |
| Flexural Strength | 37.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 55.6 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ablebond 7501F | Henkel Ablestik | Epoxy | Ablebond |
| Calprene® 501 | Dynasol Elastomers | SBS | Calprene® |
| EMPILON庐 HN70 | EMPILON | SEBS | EMPILON® |
| Escorene™ Ultra LD 755 Series | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| TechnoPet GF 45 2 0 | TechnoCompound GmbH | PET | TechnoPet |
