Order Products : sales@su-jiao.com
OmniPro™ TPO MF10 HSV
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | OMNI Plastics, LLC |
| Trademark: | OmniPro™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ftWGaw_OmniPro-TPO-MF10-HSV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Impact Resistance, High Stiffness, Mineral Reinforced, Heat & UV Stabilized, Thermoplastic Elastomer |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.978 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 15 | g/10 min | ASTM D1238 |
| Molding Shrinkage | 1.0 to 1.6 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 17.2 | MPa | ASTM D638 |
| Flexural Modulus | 1100 | MPa | ASTM D790 |
| Flexural Strength | 17.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (-5°C) | No Break | ISO 179/1A | |
| Charpy Unnotched Impact Strength (-5°C) | No Break | ISO 179/1U | |
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 320 | J/m | |
| 23°C, 3.18 mm | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.18 mm) | 71.1 | °C | ASTM D648 |
| Vicat Softening Temperature | 138 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 204 to 249 | °C | |
| Middle Temperature | 216 to 260 | °C | |
| Front Temperature | 216 to 260 | °C | |
| Nozzle Temperature | 216 to 260 | °C | |
| Processing (Melt) Temp | 216 to 260 | °C | |
| Mold Temperature | 26.7 to 60.0 | °C | |
| Back Pressure | 0.345 to 0.689 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RJM SI301G30 | RJM International, Inc. | PET | RJM |
| Sindustris PP HM5303W | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| AMTOPP TP30 | Inteplast Group | PP, Unspecified | AMTOPP |
| DynaChar™ C228 | Polymer Dynamix | Polyolefin, Unspecified | DynaChar™ |
| Petlon R-Prime A3-G30-00-BK | Petlon Polymers Ltd | Nylon 66 | Petlon R-Prime |
