Order Products : sales@su-jiao.com
Softflex® 7700
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Softflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fqXgkU_Softflex-7700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Softflex® 7700 is a Thermoplastic Elastomer (TPE) product. It is available in North America. Typical application: Engineering/Industrial Parts. |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(224°C/1.2 kg) | 25 | g/10 min | ASTM D1238 |
| Molding Shrinkage | ASTM D955 | ||
| Flow : 3.18 mm | 1.2 to 1.6 | % | |
| Across Flow : 3.18 mm | 1.2 to 1.6 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 72 to 82 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% Strain | 2.96 | MPa | |
| 100% Strain | 4.69 | MPa | |
| 300% Strain | 2.76 | MPa | |
| Tensile Strength 2(Yield) | 34.5 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 540 | % | ASTM D412 |
| Tear Strength | 87.6 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 28 | % | ASTM D395B |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Overmold Bonding | ABS, PC, ABS/PC, PPO |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rhelon G1030H-00 | RheTech, Inc. | Nylon 6 | Rhelon |
| NYCOA Polyamide 2263 | Nycoa (Nylon Corporation of America) | Nylon+TPE | NYCOA Polyamide |
| Nylene® BX3WQ662(X) | Custom Resins Group | Nylon 6 | Nylene® |
| Escorene™ Ultra MV 02528EH2 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| DURANEX® CN7030LN/LB | Polyplastics Co., Ltd. | PBT | DURANEX® |
