Order Products : sales@su-jiao.com
Tuftec™ H1051
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | AKelastomers |
| Trademark: | Tuftec™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fpfAom_Tuftec-H1051.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Polymer relatively high in styrene content, with long-chain styrene blocks. Particularly effective for high mechanical strength, and for compatibilization of styrenic resins and polyphenyleneethers (PPEs). It is supplied in pellet form. Olefinic and styrenic resins modifier, for high impact strength. Compatibilizer. Adhesives and sealants component. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.80 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 96 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 8.30 | MPa | ISO 37 |
| Tensile Stress 1(Break) | 32.3 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 600 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Type 1A, 500 mm/min |
| 2 . | Type 1A, 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROPRENE® 1 A60 E6N V0 | Taro Plast S.p.A. | TPV | TAROPRENE® |
| TUFNYL® SHS NATURAL | SRF Ltd. | Nylon 6 | TUFNYL® |
| KPOL-HDPE HD K-I 8/962 | KPOL Chem Co. | HDPE | KPOL-HDPE |
| Kostrate® EDGE PSG 02 Impact Modifier | Plastic Selection Group, Inc. | TP, Unspecified | Kostrate® EDGE |
| Plaslube® PC-50/TF/13/SI/2 NAT | Techmer Engineered Solutions | PC | Plaslube® |
