Order Products : sales@su-jiao.com
Innothane® IE-3067
| Category: | TSU , Polyurethane Thermoset Elastomer |
| Manufacturer: | Innovative Polymers, Inc. |
| Trademark: | Innothane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fnrDIU_Innothane-IE-3067.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IE-3067 is a rigid polyurethane spray coat formulated for meter mix dispensing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA or TDI. This product was developed to be used where vertical lay-ups are required. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| Hardener | 1.22 | g/cm³ | |
| Cured | 1.24 | g/cm³ | |
| Base Resin | 1.34 | g/cm³ |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 4380 | MPa | ASTM D790 |
| Flexural Strength | 78.6 | MPa | ASTM D790 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Volume: 100 Mix Ratio by Weight: 91 | ||
| Resin | Mix Ratio by Weight: 100 Mix Ratio by Volume: 100 | ||
| Demold Time | 15 to 25 | min |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity | |||
| 25°C 1 | 2.5 | Pa·s | |
| 25°C 2 | 16 | Pa·s | |
| Curing Time (25°C) | 1.7E+2 | hr | |
| Gel Time | 2.0 to 4.0 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 65 to 75 | ASTM D2240 |
| Note Message | |
|---|---|
| 1 . | Hardener |
| 2 . | Resin |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Repro HoPP MF | ResMart | PP Homopolymer | ResMart Repro |
| Varcum 29341 | Durez Corporation | Phenolic | Varcum |
| ALCUDIA® HDPE TR-131 | REPSOL | HDPE | ALCUDIA® HDPE |
| LNP™ LUBRICOMP™ DFL36 compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
| VALOX™ 357 resin | SABIC Innovative Plastics | PC+PBT | VALOX™ |
