Order Products : sales@su-jiao.com
Eltex® TUB 433-NA00
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | INEOS Olefins & Polymers Europe |
| Trademark: | Eltex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fnDd8b_Eltex-TUB-433-NA00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Eltex TUB 433-NA00 is a low melt flow rate, long term heat stabilized, high impact copolymer for pipe, blow moulding and sheet extrusion applications. It offers a very good balance stiffness - impact strength (even at low temperature) and excellent processability. Applications:
Benefits and Features:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.905 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.30 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 1500 | MPa | |
| Tensile Stress (Yield, 23°C, 4.00 mm, Injection Molded) | 28.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, 23°C, 4.00 mm, Injection Molded) | 9.0 | % | ISO 527-2/50 |
| Flexural Modulus 2(23°C, 4.00 mm, Compression Molded) | 1500 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 3 | ISO 179/1eA | ||
| -20°C, Injection Molded | 7.0 | kJ/m² | |
| 0°C, Injection Molded | 18 | kJ/m² | |
| 23°C, Injection Molded | > 50 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 95.0 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 155 | °C | ISO 306/A |
| Melting Temperature | 165 | °C | ASTM D3417 |
| Oxidation Induction Time (200°C) | > 30 | min | DIN EN 728 |
| Note Message | |
|---|---|
| 1 . | Calculated from ring stiffness measurements carried out on 110 mm solid wall pipes |
| 2 . | Cooling Rate = -15°C/min |
| 3 . | 4 mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ MDPE NG 7525 | The Dow Chemical Company | MDPE | DOW™ MDPE |
| Avalon 69 | Greene, Tweed & Co. | PTFE | Avalon |
| Dorlyl PVC GFE 65E | DORLYL S.N.C. | PVC, Unspecified | Dorlyl PVC |
| Osterlene® LLDB-2-919 | Osterman & Company | LLDPE | Osterlene® |
| PENTAMID B GK30 H LS black | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
