Order Products : sales@su-jiao.com
SureSpec LD20-040
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fitpW1_SureSpec-LD20-040.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LD20-040 is a certified prime resin developed for EXTRUSION of good clarity Blown Film for packaging of articles requiring good opticals. LD20-040 features easy processability, and optimal balance of film strength, stiffness, good openability and excellent sealability. Maximum recommended film drawdown is 1.0 mil. LD20-040 contains medium slip and medium antiblock. LD20-040 complies with FDA regulation 21CFR 177.1520 (c) 2.2 and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.922 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 4.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 32 | µm | |
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 32 µm | 186 | MPa | |
| 1% Secant, TD : 32 µm | 228 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 32 µm | 10.0 | MPa | |
| TD : Yield, 32 µm | 12.0 | MPa | |
| MD : Break, 32 µm | 24.0 | MPa | |
| TD : Break, 32 µm | 17.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 32 µm | 360 | % | |
| TD : Break, 32 µm | 700 | % | |
| Dart Drop Impact 1(25 µm) | 80 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 32 µm | 560 | g | |
| TD : 32 µm | 160 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 31.8 µm, Blown Film) | 70 | ASTM D2457 | |
| Haze (31.8 µm, Blown Film) | 6.0 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecotek® PC30 GR20 GR003 ZG20 | Eurotec Engineering Plastics | PC | Tecotek® |
| SUMILITE® EL-3838 | Sumitomo Bakelite Co., Ltd. | Epoxy | SUMILITE® |
| Zhongfa PA6 BZR16 | Yuyao Zhongfa Engineering Plastics Co. Ltd. | Nylon 6 | Zhongfa |
| ALAMID® 6.6 MOD UNGEFARBT-8300 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | ALAMID® |
| OP - ABS ABS 25CCF | Oxford Polymers | ABS | OP - ABS |
