Order Products : sales@su-jiao.com
EPO-TEK® 730
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fgxzKp_EPO-TEK-730.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EPO-TEK® 730 is a two component, thixotropic, room temperature-curing epoxy adhesive. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Particle Size | < 20.0 | µm |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Degradation Temperature | 364 | °C | TGA |
| Die Shear Strength - >10 kg (23°C) | 23.4 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 150 | °C | |
| Intermittent | -55 to 250 | °C | |
| Storage Modulus (23°C) | 852 | MPa | |
| Thixotropic Index | 2.10 | ||
| Weight Loss on Heating | |||
| 200°C | 1.4 | % | |
| 250°C | 2.2 | % | |
| 300°C | 4.2 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 55.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 6.6E-5 | cm/cm/°C | |
| -- 3 | 2.5E-4 | cm/cm/°C |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 1.0 | ||
| Part B | Mix Ratio by Weight: 1.0 | ||
| Shelf Life (23°C) | 52 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | |||
| -- 4 | Tan | ||
| -- 5 | Tan | ||
| Density | |||
| Part B | 0.938 | g/cm³ | |
| Part A | 1.12 | g/cm³ | |
| Viscosity 6(23°C) | 80 to 120 | Pa·s | |
| Curing Time (80°C) | 2.0 | hr | |
| Pot Life | 60 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 64 | ||
| Lap Shear Strength (23°C) | > 13.8 | MPa | |
| Relative Permittivity (1 kHz) | 3.17 | ||
| Volume Resistivity (23°C) | > 3.0E+13 | ohms·cm | |
| Dissipation Factor (1 kHz) | 0.021 |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | Part B |
| 5 . | Part A |
| 6 . | 2.5 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Marlex® EHM 6004 | Chevron Phillips Chemical Company LLC | HDPE | Marlex® |
| SIBUR PP H552 IM/2 | SIBUR, LLC | PP Homopolymer | SIBUR PP |
| Sylvin 8280-55 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Grilamid® XE 4107 black 9992 | EMS-GRIVORY | Nylon 6/12 | Grilamid® |
| Hifax TYC 1168X E BLACK | LyondellBasell Industries | PP Copolymer | Hifax |
