Order Products : sales@su-jiao.com

UNITAL® C

Category:	Acetal (POM) Copolymer+PE , Acetal (POM) Copolymer + PE
Manufacturer:	Nytef Plastics, Ltd.
Trademark:	UNITAL®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ffVACS_UNITAL-C.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

UNITAL® Acetal (polyoxy-methylene) offers design engineers a superior blend of strength, stiffness, lubricity, and dimensional stability. These properties, along with inherent machining ease, have made UNITAL one of the most widely used engineering grade thermoplastics. To meet specific application configurations and to maximize production efficiencies, Nytef Plastics offers a broad array of UNITAL Acetal stock shapes. These materials include both homopolymer (DELRIN®) and copolymer unfilled grades as well as PTFE-filled grades for enhanced wear resistance. Nytef also offers an electrically conductive grade of UNITAL Acetal that is used in the microelectronics industry to dissipate static electric charges.

Base resin: Acetal Copolymer (POM), Best machinability, improved chemical resistance, FDA Compliant

General Information
Features	Copolymer Good Chemical Resistance Good Dimensional Stability Good Wear Resistance High Stiffness High Strength Low Moisture Absorption Lubricated Machinable
Uses	Automotive Applications Bearings Bushings Electrical Parts Electrical/Electronic Applications Fluid Handling Food Service Applications Gears Molds/Dies/Tools Pump Parts Valves/Valve Parts Wear Strip
Agency Ratings	FDA Unspecified Rating NSF Unspecified Rating USDA 3A USDA Unspecified Approval
Forms	Preformed Parts Rod

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.40	g/cm³	ASTM D792
Water Absorption			ASTM D570
24 hr	0.25	%
Saturation	0.90	%

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	90		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2760	MPa	ASTM D638
Tensile Strength	62.1 to 70.3	MPa	ASTM D638
Tensile Elongation (Break)	30 to 60	%	ASTM D638
Flexural Modulus	2520	MPa	ASTM D790
Flexural Strength	82.7	MPa	ASTM D790
Compressive Strength	103	MPa	ASTM D695
Coefficient of Friction	0.21

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	53	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	104	°C	ASTM D648
Continuous Use Temperature	85.0	°C	Internal Method
Peak Melting Temperature	168	°C	ASTM D3418
CLTE - Flow	9.7E-5	cm/cm/°C	ASTM D696

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+15	ohms·cm	ASTM D257
Dielectric Strength ¹	20	kV/mm	ASTM D149
Dielectric Constant			ASTM D150
60 Hz	3.80
1 MHz	3.80
Dissipation Factor (60 Hz)	3.0E-3		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating	HB		UL 94

Note Message
1 .	Method A (Short-Time)

Resin Grade	Manufacturer	Category	Trademark
Sup-tech S703	Shanghai Suptech Engineering Plastics Co. Ltd.	ABS	Sup-tech
TATREN® IM 22 63	Slovnaft Petrochemicals, s.r.o.	PP Impact Copolymer	TATREN®
BESTPOLUX PCA65	Triesa Plastics	PC+ABS	BESTPOLUX
Hifax TYC 337P 2 S61467	LyondellBasell Industries	PP Copolymer	Hifax
Sylvin 7868-80C Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin