Order Products : sales@su-jiao.com
NEMCON E ABS 20CF
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | NEMCON E |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ff0SS0_NEMCON-E-ABS-20CF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nemcon™ E-series products are designed for use in ESDA electronic assembly environments where strict control of ESD and cleanliness are critical. Nemcon™ E ABS 20CF is a high modulus carbon fiber-reinforced ABS with excellent conductivity. It is suitable for a wide variety of injection molding applications, including electronic components, shipping trays, storage racks, electronic housings and work surfaces. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.13 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 10500 | MPa | ASTM D638 |
| Tensile Strength 2(Break, 23°C) | 95.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 23°C) | 1.9 | % | ASTM D638 |
| Flexural Modulus 4(23°C) | 9540 | MPa | ASTM D790 |
| Flexural Strength 5(Yield, 23°C) | 128 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 46 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 98.0 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 2.8E+3 | ohms | ASTM D257 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF8FMA (Series: FC/AD1) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Grivory® GVL-4H nat | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| Karina NATURAL PVC COMPOUND 731D25/1-WK-EC | Karina Ind. e Com. de Plásticos Ltda | PVC, Unspecified | Karina |
| Plenco 01530 (Injection) | Plastics Engineering Co. | Polyester, TS | Plenco |
| INEOS PP T10G-03 | INEOS Olefins & Polymers USA | TPO | INEOS PP |
