Sarlink® TPV X6755 (PRELIMINARY DATA) Datasheet,TPV,Teknor Apex Company-SHANGHAI SUSHENG

Message
SARLINK® TPV X6755 is a high performance thermoplastic vulcanizate used in automotive applications including interior trim. Sarlink TPV X6755 is a medium hardness, low density grade, available in Nat or can be color-matched with good color stability, exhibiting good UV resistance. This grade is designed for injection molding but could also be extruded.

General Information
Features	Low Specific Gravity Low compressive deformability Low density Light stabilization Good UV resistance Workability, good Good formability Good color stability Good coloring Good adhesion Good chemical resistance Medium hardness
Uses	Seals Application in Automobile Field Car interior parts Car interior equipment Rubber substitution Profile
RoHS Compliance	RoHS compliance
Appearance	Unspecified Color Opacity Available colors
Forms	Particle
Processing Method	Extrusion Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ISO 1183

Hardness	Nominal Value	Test Method
Durometer Hardness		ISO 868
Shore A, 1 second, injection molding	60	ISO 868
Shore A, 5 seconds, injection molding	58	ISO 868

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	1.90	MPa	ISO 37
Tensile Stress (Break)	5.35	MPa	ISO 37
Tensile Elongation (Break)	630	%	ISO 37
Compression Set (70°C, 22 hr)	38	%	ISO 815

Fill Analysis	Nominal Value	Unit	Test Method
Apparent Viscosity (200°C, 206 sec^-1)	216	Pa·s	ASTM D3835

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Drying Temperature	82	°C
Drying Time	3.0	hr
Rear Temperature	177 - 216	°C
Middle Temperature	177 - 216	°C
Front Temperature	177 - 216	°C
Nozzle Temperature	188 - 221	°C
Processing (Melt) Temp	182 - 221	°C
Mold Temperature	10 - 66	°C
Back Pressure	0.0689 - 1.03	MPa
Screw Speed	100 - 200	rpm
Screw L/D Ratio	20.0:1.0

Extrusion	Nominal Value	Unit
Drying Temperature	82	°C
Drying Time	3.0	hr
Cylinder Zone 1 Temp.	182 - 204	°C
Cylinder Zone 2 Temp.	182 - 204	°C
Cylinder Zone 3 Temp.	188 - 210	°C
Cylinder Zone 4 Temp.	188 - 210	°C
Melt Temperature	193 - 216	°C
Die Temperature	193 - 216	°C
Take-Off Roll	21 - 49	°C

Extrusion instructions
Screen Pack: 20 to 60 meshScrew: 3:1 Compression Ratio

Category:	TPV , Thermoplastic Vulcanizate
Manufacturer:	Teknor Apex Company
Trademark:	Sarlink® TPV
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fe3dzv_SarlinkTPVX6755PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
MELOPAS® MF 3025	RASCHIG GmbH	Mel Formald	MELOPAS®
TECHNYL® SSD 330 KNF/E NATURAL	Solvay Engineering Plastics	Nylon 66	TECHNYL®
APEX® 3302-70NT	Teknor Apex Company	PVC, Flexible	APEX®
Latiblend 3675 G/10	LATI S.p.A.	ABS+PBT	Latiblend
Petrothene® LT606932	LyondellBasell Industries	HDPE	Petrothene®