Order Products : sales@su-jiao.com
TechnoMid B330
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | TechnoCompound GmbH |
| Trademark: | TechnoMid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fdWdVv_TechnoMid-B330.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TechnoMid compounds are particularly suitable for technical applications due to their outstanding characteristics. The excellent sliding qualities and the favourable abrasion behaviour of TechnoMid compounds also permit their use in bearings. TechnoMid compounds count among the technical thermoplastic compounds. PA6 is made from caprolactam by means of hydrolytic polymerisation. The PA6.6 is produced by poly-condensation of hexa-ethylene diamine and adipic acid. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.35 | g/cm³ | ISO 1183 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 10500 | MPa | ISO 527-2 |
| Additional Information |
|---|
| Moisture Content, Infared 105°C, 15 min: <0.10%Ash Content, ISO 3451, 950°C: 30% |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 240 - 280 | °C | |
| Mold Temperature | 30.0 - 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 507 HB | RTP Company | SAN | RTP |
| TRIMID® N6-200N | Polymer Technology and Services, LLC | Nylon 6 | TRIMID® |
| AKROMID® A3 GF 13 S1 natural (2167) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| MAJORIS GE264 - 8229 | AD majoris | PP, Unspecified | MAJORIS |
| Techsil® RTV27844 | Techsil Limited | Silicone Rubber, RTV-2 | Techsil® |
