Order Products : sales@su-jiao.com
ESENTTIA 08H85DB-BC
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | faHf55_ESENTTIA-08H85DB-BC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: Homopolymer polypropylene with excellent optical properties and processability, with high cleanness and clarity, with slip and antiblock additives. Recommended for: Non oriented TWQ films low gauge. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 8.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 31.7 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 11 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1240 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 43 | J/m | ASTM D256A |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC MPH 75/H | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| FERREX® GPP40CC90UL | Ferro Corporation | PP Homopolymer | FERREX® |
| HiFill FR® PA6 GF13 FR-N BK | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
| Keltan® 6850Q | LANXESS Buna GmbH | EPDM | Keltan® |
| Dryflex® SE 90A001 | ELASTO | TPE | Dryflex® |
