Order Products : sales@su-jiao.com
MAJORIS DWB304X
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fWmcSi_MAJORIS-DWB304X.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJORIS DWB304X is ultra low weight reinforced polypropylene compound intended for injection moulding. The product is available in natural, but other colours can be provided on request. MAJORIS DWB304X has been developed especially for demanding applications in automotive industry and various engineering sectors. MAJORIS DWB304X has very low density, high rigidity, good dimensional stability and good aspect surface. APPLICATIONS Products requiring low density and high mechanical properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.945 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 4.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5400 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 80.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 3.4 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 4850 | MPa | ISO 178 |
| Flexural Stress | 127 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 7.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 39 | kJ/m² | ISO 179/1eU |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 40.0 - 80.0 | °C | |
| Processing (Melt) Temp | 230 - 270 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Moderate | ||
| Holding Pressure | 30.0 - 60.0 | MPa |
| Injection instructions |
|---|
| Back pressure: as low as possibleScrew speed: Low to medium |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-1017A | Teknor Apex Company | TPE | Telcar® |
| CYPOL 920R | Pooya Polymer Tehran | Polyolefin, Unspecified | CYPOL |
| Hyundai EP PA66 LD910 | HYUNDAI EP Co., Ltd. | Nylon 66 | Hyundai EP PA66 |
| KMI PP KM-569IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
| Naturacell® 21 | Rotuba Extruders, Inc. | CA | Naturacell® |
