Order Products : sales@su-jiao.com
POLYCOMPO PE SP1540
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fVkoEH_POLYCOMPO-PE-SP1540.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE SP1540 is a Linear Low Density Polyethylene product. It can be processed by cast film and is available in Asia Pacific. Typical application: Film. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.913 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.8 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance (Injection Molded) | 1000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 54 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 18.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 190 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | No Break | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 96.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 113 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRILAC AG12AJ | Formosa Plastics Corporation | ABS | TAIRILAC |
| DESLON™ 6 DSC101IG3 | DESCO Co., Ltd. | Nylon 6 | DESLON™ 6 |
| ELASTOSIL® M 4541 | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| ESTABLEND 7500 V0 HF | Cossa Polimeri S.r.l. | PC+ABS | ESTABLEND |
| Hostacom EKC 265N G51359 | LyondellBasell Industries | PP Copolymer | Hostacom |
