Order Products : sales@su-jiao.com
Sarlink® TPE ME-2170B (PRELIMINARY DATA)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Sarlink® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fVQ9Tp_SarlinkTPEME2170BPRELIMINARYDATA.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sarlink TPE ME-2100 Series are general purpose thermoplastic elastomers designed for exterior automotive molding applications. Sarlink TPE ME-2170B is a medium hardness, high density, filled grade having good UV resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 72 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.60 | MPa | ISO 37 |
| Tensile Strength (Break) | 6.90 | MPa | ISO 37 |
| Tensile Elongation (Break) | 750 | % | ISO 37 |
| Compression Set (70°C, 22 hr) | 46 | % | ISO 815 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 206 sec^-1) | 115 | Pa·s | ISO 11443 |
| Legal statement |
|---|
| The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 165 - 175 | °C | |
| Middle Temperature | 175 - 185 | °C | |
| Front Temperature | 187 - 197 | °C | |
| Nozzle Temperature | 187 - 197 | °C | |
| Processing (Melt) Temp | 187 - 197 | °C | |
| Mold Temperature | 20 - 40 | °C | |
| Injection Pressure | 1.38 - 6.89 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.172 - 0.862 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 176°F (80°C). |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ferro PP TPP40AF22RD | Ferro Corporation | PP Homopolymer | Ferro PP |
| Flontech® FT-CARR10-FM-6 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Hybrid S464 | Ravago Manufacturing Americas, LLC | PC+ABS | Hybrid |
| Rotuba CAP CP800 (10% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
| DAI-EL™ LT-252 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
