Order Products : sales@su-jiao.com
Pharmalene® BC 82 PH
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Versalis S.p.A. |
| Trademark: | Pharmalene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fTUaki_Pharmalene-BC-82-PH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Pharmalene BC 82 PH is an high density polyethylene hexene copolymer, produced with gas phase technology. Its production is realized in conformity to the good manufacturing practices (GMP). The main use is in the pharmaceutical sector. The antioxidant additives used in it are approved by the polyethylene monography of the European Pharmacopoeia and used in compliance with it.The resin formulation is established by years of experience and it is not subject of changes. Pharmalene BC 82 PH is a multipurpose blow moulding material. This technology is used for manufacturing containers for solid or bottles for liquid. Pharmalene BC 82 PH, thanks to its limited gels content, can be even used for film production. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 0.25 | g/10 min | |
| 190°C/21.6 kg | 23 | g/10 min | |
| 190°C/5.0 kg | 0.90 | g/10 min | |
| Environmental Stress-Cracking Resistance (Compression Molded) | > 60.0 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 64 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 27.0 | MPa | |
| Break, Compression Molded | 30.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | > 600 | % | ISO 527-2 |
| Flexural Modulus (Compression Molded) | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 180 | J/m | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -60.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 125 | °C | ISO 306/A |
| Melting Temperature | 135 | °C | Internal Method |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 to 180 | °C | |
| Cylinder Zone 3 Temp. | 185 to 195 | °C | |
| Melt Temperature | 195 to 205 | °C | |
| Head Temperature | 185 to 190 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ EPDM0466-BK09 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| Grilamid® TR 90 NZZ nat | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Infino HN-3102G | SAMSUNG SDI CO., LTD. | PC | Infino |
| POLYfill PPHC GF3030 PD2 | Polykemi AB | PP, Unspecified | POLYfill |
| Petrothene® LH735000 | LyondellBasell Industries | HDPE | Petrothene® |
