Category: | HDPE , High Density Polyethylene |
Manufacturer: | JG Summit Petrochemical Corporation |
Trademark: | EVALENE® HDPE |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | fSM7ab_EVALENE-HDPE-HF14462.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
HDPE is used to make large drums, bleach bottles, shopping bags, crates nets and pails. Tough. Rigid. Heavy Duty. With High Chemical Resistance. These qualities make Evalene® HDPE suitable for a diverse line of industrial products. Blown Film: Shopping and grocery bags Pipes: Pressure and non-pressure pipes Blow Molding: Bottles for household and industrial chemicals, large drums Injection Molding: Pallets, crates, cases, trays, toys, houseware, caps |
General Information | |
---|---|
Features |
|
Uses |
|
Agency Ratings |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 0.946 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
190°C/2.16 kg 1 | 0.15 | g/10 min | |
190°C/21.6 kg | 14 | g/10 min |
Films | Nominal Value | Unit | Test Method |
---|---|---|---|
Film Thickness - Tested | 25 | µm | |
Secant Modulus 2 | ASTM D882 | ||
MD : 25 µm | 1000 | MPa | |
TD : 25 µm | 1050 | MPa | |
Tensile Strength 3 | ASTM D882 | ||
MD : Yield, 25 µm | 28.0 | MPa | |
TD : Yield, 25 µm | 30.0 | MPa | |
MD : Break, 25 µm | 38.0 | MPa | |
TD : Break, 25 µm | 35.0 | MPa | |
Tensile Elongation 4 | ASTM D882 | ||
MD : Break, 25 µm | > 500 | % | |
TD : Break, 25 µm | > 500 | % | |
Dart Drop Impact (25 µm) | 120 | g | ASTM D1709A |
Elmendorf Tear Strength | ASTM D1922 | ||
MD : 25 µm | 15 | g | |
TD : 25 µm | 50 | g |
Note Message | |
---|---|
1 . | Product is controlled by Flow Index. melt Index is estimated for customer use. |
2 . | 25 mm/min |
3 . | 500 mm/min |
4 . | 500 mm/min |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
SABIC® PP 412MN40 | Saudi Basic Industries Corporation (SABIC) | PP Impact Copolymer | SABIC® PP |
BMC 310 | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
elitel UE3350 | UNITIKA Plastics Division | TPC-ET | elitel |
Kingfa HG-108 | Kingfa | PP, Unspecified | Kingfa |
Plasmer 1050DB/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |