Order Products : sales@su-jiao.com
Amodel® A-1133 NL WH 505
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Amodel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fS6Flo_Amodel-A-1133-NL-WH-505.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AMODEL A- 1133 NL resin is 33% glass fiber reinforced polyphthalamide (PPA), which is characterized by highly reflective white resin. The brand is characterized by high deformation temperature and low hygroscopicity compatible with SMT process. -white: A- 1133 NL WH 505 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.54 | g/cm³ | ISO 1183/A |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.20 | % | ASTM D955 |
| Transverse flow | 0.60 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.16 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 12400 | MPa | ASTM D638 |
| Tensile Strength (Break) | 179 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.8 | % | ASTM D638 |
| Flexural Modulus | 11700 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 236 | MPa | ASTM D790 |
| Poisson's Ratio | 0.41 | ASTM E132 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 37 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 271 | °C | ASTM D648 |
| Melting Temperature | 310 | °C | ASTM D570 |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow : 0 to 100°C | 2.3E-5 | cm/cm/°C | ASTM E831 |
| Flow : 160 to 249°C | 1.4E-5 | cm/cm/°C | ASTM E831 |
| Lateral : 0 to 100°C | 4.5E-6 | cm/cm/°C | ASTM E831 |
| Lateral : 160 to 249°C | 1.0E-4 | cm/cm/°C | ASTM E831 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.045 | % | |
| Rear Temperature | 304 - 318 | °C | |
| Front Temperature | 316 - 329 | °C | |
| Processing (Melt) Temp | 321 - 343 | °C | |
| Mold Temperature | 135 | °C |
| Injection instructions |
|---|
| 建议采用通用螺杆，取最小背压 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NEXUS PC/ABS PC/ABSFR9001 | Nexus Resin Group, LLC. | PC+ABS | NEXUS PC/ABS |
| Nylfor® B2 K/30 NERO | SO.F.TER. SPA | Nylon 6 | Nylfor® |
| Geon™ Vinyl Flexible 90046 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| EMAC® SP2404 | Westlake Chemical Corporation | EMA | EMAC® |
| Magnobond 92-1 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
