Order Products : sales@su-jiao.com
SureSpec IP-005NB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fRfuwU_SureSpec-IP-005NB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IP-005NB is a Polypropylene certified prime NO BREAK resin developed for Extra High Izod Impact, containers produced by Thermoforming, Extrusion-Blow or Injection-Blow molding equipment exhibit good Low Temperature Drop Impact for applications requiring superior rigidity, toughness and good organoleptic properties. IP-005NB complies with FDA regulation 21CFR 177.1520 (a)(3)(i) (c)3.1+3.2, and most international regulations concerning Polypropylene use in contact with food. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.50 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale, Injection Molded) | 78 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 29.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 10 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1340 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Vicat Softening Temperature 4 | 135 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| 4 . | Injection molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Michimid K4100GF33-03 | API Polymers, Inc. | Nylon 6 | Michimid |
| Shin-Etsu Elastomer SV-57000U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| TyrFil® MG-25 | Pathway Polymers | PUR-MDI | TyrFil® |
| Iupilon® GSH2020DF | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| KMI PP KM-199IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
