Order Products : sales@su-jiao.com
Ultrason® P 3010 MR SW 10101
| Category: | PPSU , Polyphenylsulfone |
| Manufacturer: | BASF Corporation |
| Trademark: | Ultrason® P |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fQw6sV_Ultrason-P-3010-MR-SW-10101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Unreinforced, medium viscosity injection moulding grade, flameretardent and with improved chemical resistance.This grade is black colored and demolding optimized. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.29 | g/cm³ | ISO 1183 |
| Apparent Density | 0.70 to 0.80 | g/cm³ | |
| Melt Volume-Flow Rate (MVR) (360°C/10.0 kg) | 35.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 1.0 | % | |
| Flow | 0.90 | % | |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 1.2 | % | |
| Equilibrium, 23°C, 50% RH | 0.60 | % | |
| Viscosity Number 1 | 71.0 | cm³/g | ISO 307 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ball Indentation Hardness (H 358/30) | 124 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2270 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 74.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 7.8 | % | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 24 | kJ/m² | |
| 23°C | 60 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -30°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 196 | °C | ISO 75-2/A |
| Glass Transition Temperature 2 | 220 | °C | ISO 11357-2 |
| CLTE - Flow | |||
| 23 to 80°C | 5.5E-5 | cm/cm/°C | ISO 11359-2 |
| 180°C | 6.3E-5 | cm/cm/°C | DIN 53752 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | ||
| 3.00 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 140 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Hopper Temperature | 80.0 | °C | |
| Rear Temperature | 350 | °C | |
| Middle Temperature | 360 | °C | |
| Front Temperature | 370 | °C | |
| Nozzle Temperature | 370 | °C | |
| Processing (Melt) Temp | 350 to 390 | °C | |
| Mold Temperature | 140 to 180 | °C | |
| Screw Speed | < 300 | mm/sec |
| Note Message | |
|---|---|
| 1 . | in 0,01 g/ml Phenol/1,2, ortho-Dichlorbenzol, 1:1 |
| 2 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trilliant™ HC THC-01-AS149031 Trans Blue | PolyOne Corporation | ABS | Trilliant™ HC |
| Ultramid® A3K FC R01 | BASF Corporation | Nylon 66 | Ultramid® |
| APEX® 3310-75NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Infino CF-3104HF | SAMSUNG SDI CO., LTD. | PC | Infino |
| Plenco 07080 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
