Order Products : sales@su-jiao.com
Andur 7003 AP-M
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fPzPnF_Andur-7003-AP-M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 7003AP-M is a polyether (PPG) based liquid, toluene diisocyanate terminated prepolymer. A water-white clear elastomer with a hardness of 70 Shore A is obtained when this prepolymer is cured with Curene 89-LC. Elastomers of lower hardness can be obtained through the use of plasticizers. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 21°C | 6800 | cP | ASTM D2393 |
| 70°C | 400 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 2.8 to 3.2%Specific Gravity, ASTM D792, 70°F: 1.04 g/mlSpecific Gravity, ASTM D792, 212°F: 1.03 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| HiFill® PA6 GM40 L | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| HIVOREX 5200SU | Lotte Chemical Corporation | HDPE | HIVOREX |
| HIFOR Xtreme® SC74871 | Westlake Chemical Corporation | LLDPE | HIFOR Xtreme® |
| Silastic® Q7-4750 | Dow Corning Corporation | Silicone | Silastic® |
| Sylvin 9604-90 CLEAR 895 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
