Order Products : sales@su-jiao.com
Sinvicomp SFN8010
| Category: | PVC, Flexible , Flexible Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Asia Pacific PTE. LTD. |
| Trademark: | Sinvicomp |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fPaV1g_Sinvicomp-SFN8010.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sinvicomp SFN8010 is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific for injection molding. Primary attribute of Sinvicomp SFN8010: Chemical Resistant. Typical application of Sinvicomp SFN8010: Consumer Goods |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.25 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 12.3 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 400 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Stability 3(190°C) | > 1 | hr | BS 2782 |
| Note Message | |
|---|---|
| 1 . | 250 mm/min |
| 2 . | 250 mm/min |
| 3 . | Congo Red |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALCOM® AWL 15/1 WT1471-04LB | ALBIS PLASTIC GmbH | ABS | ALCOM® AWL |
| INSULCAST® 3230 LV/INSULCURE 11B | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| Osterlene® PPH35F | Osterman & Company | PP Homopolymer | Osterlene® |
| Starex LM-0990 | LOTTE ADVANCED MATERIALS CO., LTD. | ABS | Starex |
| Moplen HP400H | LyondellBasell Industries | PP Homopolymer | Moplen |
