Order Products : sales@su-jiao.com

NuSil CV-2680-12

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fLEw8O_NuSil-CV-2680-12.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: 0.012 inches (305 microns) Thick, 2-Part Film, Lap Shear 250 psi (1.7 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: 0.012 inches (305 microns) Thick, 2-Part Film, Lap Shear 250 psi (1.7 MPa)

General Information
Features	Low to No Outgassing
Uses	Adhesives Aerospace Applications Electrical/Electronic Applications Film
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit
CLTE - Flow	4.7E-4	cm/cm/°C

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Translucent
Curing Time (65°C)	4.0	hr
Pot Life	240	min

Cured Properties	Nominal Value	Unit
Lap Shear Strength	1.72	MPa

Resin Grade	Manufacturer	Category	Trademark
ALCOM® PC 740/4 UV CC1322-08LG	ALBIS PLASTIC GmbH	PC	ALCOM® PC
Dryflex® AM 65A203B	ELASTO	SEBS	Dryflex®
KOPA® KN333HFBL1	Kolon Plastics, Inc.	Nylon 66	KOPA®
PENTAMID A GV30 HYD2 RC black	PENTAC Polymer GmbH	Nylon 66	PENTAMID A
Moplen HP500N	LyondellBasell Industries	PP Homopolymer	Moplen