Order Products : sales@su-jiao.com

Pinnacle PP 4130H

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	Pinnacle Polymers
Trademark:	Pinnacle PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fHxLAr_Pinnacle-PP-4130H.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

35 MELT FLOW ULTRA HIGH IMPACT COPOLYMER FOR INJECTION MOLDING

Pinnacle Polymers Polypropylene 4130H is made via UNIPOL™ PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.

This product is intended for injection molding of flooring, automotive, appliance, lawn and garden products, and industrial applications. Its high melt flow allows for quick filling of molds.

The 4130H product provides:

Ulta high impact and melt flow

Superior balance of stiffness and impact strength

Excellent color and processing stability

Fast cycle-time

It is characterized not only by its easy mold flow, but also high impact at both room and sub-ambient conditions.

Pinnacle's 4130H polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

General Information
Features	Fast Molding Cycle Food Contact Acceptable Good Color Stability Good Processing Stability High Flow Impact Copolymer Low Temperature Impact Resistance Ultra High Impact Resistance
Uses	Appliances Automotive Applications Flooring Industrial Applications Lawn and Garden Equipment
Agency Ratings	FDA 21 CFR 176.170 Table 1 & 2, Cond A-H FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	35	g/10 min	ASTM D1238
Molding Shrinkage - Flow	1.4	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, 3.20 mm, Injection Molded)	21.4	MPa	ASTM D638
Tensile Elongation ²(Yield, 3.20 mm, Injection Molded)	6.0	%	ASTM D638
Flexural Modulus - 1% Secant ³(3.20 mm, Injection Molded)	1070	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact ⁴(23°C, 3.20 mm, Injection Molded)	> 530	J/m	ASTM D256
Notched Izod Impact (Area) ⁵(23°C, 3.20 mm, Injection Molded)	> 52.0	kJ/m²	ASTM D256
Gardner Impact ⁶(-30°C)	33.0	J	ASTM D5420

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	99.0	°C	ASTM D648

Note Message
1 .	Type I, 51 mm/min
2 .	Type I, 51 mm/min
3 .	Type I, 1.3 mm/min
4 .	Type I
5 .	Type I
6 .	Method G, Geometry GC

Resin Grade	Manufacturer	Category	Trademark
SLOVAMID® 66 GF 25 FRI 2	Plastcom	Nylon 66	SLOVAMID® 66
SynPlast™ DUP-E	PolyOne Corporation	Di Undecyl Phthalate	SynPlast™
Adsyl 5 X 37 F	LyondellBasell Industries	Polyolefin, Unspecified	Adsyl
ARMAMID® PA 6-2UP	Poly Plastic	Nylon 6	ARMAMID®
Ferro PE RPE20HW08WH	Ferro Corporation	PE, Unspecified	Ferro PE