Order Products : sales@su-jiao.com
UNISOFT ADHESION™ AD-40A-NT-1-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT ADHESION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fHXLzz_UNISOFT-ADHESION-AD-40A-NT-1-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer. Special bonding grade to PC/ABS, PC/PBT, PC, ABS, PBT and PET. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.80 - 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 2.20 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 480 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 200 - 210 | °C | |
| Front Temperature | 220 - 230 | °C | |
| Nozzle Temperature | 235 - 255 | °C | |
| Mold Temperature | 40.0 - 65.0 | °C |
| Injection instructions |
|---|
| Temperatures are shown for PC/ABS adhesion. For better adhesion results please increase temperatures in the first 3 zones up to 15°C per zone.Material is not hygroscopic and drying is only necessary if material was stored under moisture, however pre-drying can be useful to achieve a better adhesion result to the Nylon substrate. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4283 | RTP Company | PI, TP | RTP |
| Shandong PA66 A2RG6301 | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 66 | Shandong PA66 |
| TEKAMID™ H12T | Mando Advanced Materials Co., Ltd. | ABS+Nylon | TEKAMID™ |
| Moplen EP549U | LyondellBasell Industries | PP Impact Copolymer | Moplen |
| NEXT PCR PA66 M40-300PCR | NEXT Specialty Resins, Inc. | Nylon 66 | NEXT PCR |
