Order Products : sales@su-jiao.com
Vexel 4200
| Category: | PBT , Polybutylene Terephthalate |
| Manufacturer: | Custom Resins Group |
| Trademark: | Vexel |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fGNKqu_Vexel-4200.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vexel 4200 is a 30% glass reinforced polybutylene terephthalate polyester material. Vexel products have exceptional electrical properties, are quite strong, and are especially stiff, but are typically more brittle than similar nylon products. Vexel PBT is typically used for electrical components, especially with higher voltage requirements, for high heat housings and brackets, and for other functional components where the moisture absorption of nylon may be problematic. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.53 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.30 to 0.50 | % | |
| Across Flow | 0.40 to 0.60 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 117 | MPa | ASTM D638 |
| Flexural Modulus | 7580 | MPa | ASTM D790 |
| Flexural Strength | 190 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 85 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 216 | °C | |
| 1.8 MPa, Unannealed | 207 | °C | |
| Melting Temperature | 227 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 to 138 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 4.0 | hr | |
| Suggested Max Moisture | 0.040 | % | |
| Suggested Shot Size | 30 to 80 | % | |
| Suggested Max Regrind | 25 | % | |
| Rear Temperature | 232 to 249 | °C | |
| Middle Temperature | 238 to 254 | °C | |
| Front Temperature | 243 to 266 | °C | |
| Nozzle Temperature | 249 to 282 | °C | |
| Processing (Melt) Temp | 243 to 266 | °C | |
| Mold Temperature | 54.4 to 107 | °C | |
| Injection Pressure | 68.9 to 124 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Holding Pressure | 55.2 to 96.5 | MPa | |
| Back Pressure | 0.00 to 3.45 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PA1212 PA1212BR-III | Shandong Dongchen Engineering Plastics Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| Xuchuan XCW-8880N-12 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Ad-Tech Epoxy EC-405 (50R/50H) | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| LubriOne™ GF-1010 40 MS 2 HS Black 37 | PolyOne Corporation | Nylon 6 | LubriOne™ |
| KMI PP KM-599IB | KMI Group, Inc. | PP Impact Copolymer | KMI PP |
