Order Products : sales@su-jiao.com
Lifoflex® UV FLAM 40600
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Müller Kunststoffe GmbH |
| Trademark: | Lifoflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fG5MSC_LifoflexUVFLAM40600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lifoflex FLAM are a range of halogen-free flame retardant thermoplastic elastomers (TPEs) designed to meet the most demanding applications where resistance to ignition and burning are important features. Lifoflex FLAM compounds contain additives to give them better resistance to burning compared to general TPE grades. The range includes halogen, chlorine and antimony free grades which are low smoke and compliant with the Restriction of Hazardous Substances (RoHS) directives, offering flame retardancy without the use of polybrominated diphenyl ether (PBDE). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 40 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (Yield) | 2.70 | MPa | DIN 53504 |
| Tensile Elongation - Across Flow (Break) | 650 | % | DIN 53504 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 24 | % | ISO 815 |
| 70°C, 22 hr | 54 | % | ISO 815 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | UL 94 | |
| Glow Wire Ignition Temperature (3.00 mm) | 850 650 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 170 - 180 | °C | |
| Middle Temperature | 180 - 190 | °C | |
| Front Temperature | 190 - 200 | °C | |
| Nozzle Temperature | 200 - 210 | °C | |
| Mold Temperature | 15.0 - 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 170 | °C | |
| Cylinder Zone 3 Temp. | 170 - 180 | °C | |
| Cylinder Zone 4 Temp. | 180 - 190 | °C | |
| Die Temperature | 180 - 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Safrene® M 5010SH | Safripol (PTY) LTD | HDPE | Safrene® |
| REPOL® SR20NC | Reliance Industries Limited | PP Random Copolymer | REPOL® |
| SureSpec IP-120 | Genesis Polymers | PP Impact Copolymer | SureSpec |
| JSR EPR EBM2041P | JSR Corporation | EPDM | JSR EPR |
| Sylvin 4200-88UV Yellow 4192 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
