PALRAN® R S 10

Category:	ABS , Acrylonitrile Butadiene Styrene
Manufacturer:	pal plast GmbH
Trademark:	PALRAN®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	fG10Es_PALRAN-R-S-10.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PALRAN®R S 10 is an acrylonitrile butadiene styrene (ABS) product,. It can be processed by injection molding and is available in Europe. Typical application areas are: electrical appliances. Features include: flame retardant/rated flame Impact resistance Heat resistance

General Information
Features	Impact resistance, good Heat resistance, medium
Uses	Electrical appliances
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	1.05	g/cm³	ISO 1183
Water Absorption (Saturation, 23°C)	0.25	%	ISO 62

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (23°C)	1930	MPa	ISO 527-2/1A/1
Tensile Stress (Yield, 23°C)	42.5	MPa	ISO 527-2/1A/50
Tensile Strain (Yield, 23°C)	3.0	%	ISO 527-2/1A/50

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (23°C)	14	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength (23°C)	No Break		ISO 179/1eU

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	99.5	°C	ISO 306/B50

Flammability	Nominal Value		Test Method
Flame Rating (1.60 mm)	HB		UL 94

Additional Information
Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 1850 to 2000 MPaTensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 40 to 45 MPaTensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 2 to 4 %Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 12 to 16 kJ/m²Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 98 to 101 °CDensity, ISO 1183: 1.04 to 1.06 g/cm³Water Absorption, ISO 62, 23°C, Saturation: 0.2 to 0.3 %

Additional Information

Tensile Modulus, ISO 527, 23°C, 1 mm/min, Type A: 1850 to 2000 MPaTensile Stress at Yield, ISO 527, 23°C, 50 mm/min, Type A: 40 to 45 MPaTensile Strain at Yield, ISO 527, 23°C, 50 mm/min, Type A: 2 to 4 %Charpy Notched Impact, ISO 179, Type 1, Edgewise, Notch A, 23°C: 12 to 16 kJ/m²Vicat Softening Temperature, ISO 306, B50 (50°C/h 50N): 98 to 101 °CDensity, ISO 1183: 1.04 to 1.06 g/cm³Water Absorption, ISO 62, 23°C, Saturation: 0.2 to 0.3 %

Resin Grade	Manufacturer	Category	Trademark
Premi-Ject® 6100-15	Premix, Inc.	TS, Unspecified	Premi-Ject®
NEFTEKHIM PP 1528J (T38FA)	Nizhnekamskneftekhim Inc.	PP Homopolymer	NEFTEKHIM PP
Delta N6-1G30	Delta Polymers	Nylon 6	Delta
Fortron® 1140E7	Celanese Corporation	PPS	Fortron®
ALCUDIA® LDPE CP-121	REPSOL	LDPE	ALCUDIA® LDPE