Order Products : sales@su-jiao.com
WPP TPO TPO-2563 P Black
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP TPO |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | fFQv8u_WPP-TPO-TPO-2563-P-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
WPP TPO TPO-2563 P Black is a composite polypropylene product containing 26% mineral fillers. It is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 14.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 200 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 1200 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 3.5 | kJ/m² | ISO 180 |
| 23°C | 38 | kJ/m² | ISO 180 |
| Instrumented Dart Impact 2 | ASTM D3763 | ||
| -30°C | 22.0 | J | ASTM D3763 |
| 23°C | 18.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 90.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 68.0 | °C | ISO 75-2/A |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow | 4.0E-5 | cm/cm/°C | ASTM E831 |
| Lateral | 1.5E-4 | cm/cm/°C | ASTM E831 |
| Additional Information |
|---|
| Tensile Strain at Break, ISO 527, 50mm/min: >200% |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.20 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SNOLEN® IM 31/54 | JSC Gazprom neftekhim Salavat | HDPE | SNOLEN® |
| Blendfor® A 4000/V0 NERO | SO.F.TER. SPA | PC+ABS | Blendfor® |
| Ferro PP TPP30AN58NA | Ferro Corporation | PP, Unspecified | Ferro PP |
| Hanwha Total PE 531G | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LDPE | Hanwha Total PE |
| ALCOM® PA66 910/7 GF25 MR15 | ALBIS PLASTIC GmbH | Nylon 66 | ALCOM® PA66 |
